Corrosion Protection |
Standard
Armawrap - a wraparound corrosion protection system designed to
provide an easily installed ‘cold-work’ retrofit encapsulation
system for the cladding of subsea pipelines, vertical risers and
piles in the splash-zone (can be supplied with anti-foulant
coating). Armawrap has the ability to act as a carrier for
anti-fouling systems, cold bonded to the outer skin and
specifically formulated to prevent the build up of marine growth
throughout the operational life of the system.
Armawrap’s elastomeric properties and closure system offer a
unique facility of removal and replacement to allow routine
inspection of the substrate. Hoop tension imposed on the tough,
resilient neoprene outer skin acts to force the inner layer
against the substrate surface. The inner layer is impregnated
with a gel and corrosion inhibitor which exudes into any surface
irregularities, thereby providing a seal and terminating the
supply of oxygenated water to the pipe, riser or pile surface.
This seal is not simply a barrier to corrosion, but will arrest
any existing corrosion.
ARMAWRAP LP
(low-profile) retains all the technical properties
of the standard Armawrap with an additional closure design
feature allowing it to pass freely through conductor guide
tubes.
Specifically designed to facilitate passage
through the conductor guide tubes during drilling operations. It
is a wraparound corrosion protection and anti-foulant system
providing an easily installed retrofit encapsulation system
under ‘cold-work’ conditions for the cladding of subsea
pipelines, vertical risers and piles in the splash-zone.
FLANGE WRAP
Is an individually tailored wrap encapsulating a
flange of any size. Constructed of tough neoprene and filled
with a combination of gel and corrosion inhibitor.
Armawrap VSS
Wraparound, vortex suppression, corrosion protection and
anti-foulant system providing an easily installed retrofit
encapsulation for subsea pipelines, vertical risers and piles. |
|